Products Page

Available in a 5′ long by 6″ wide configuration with pre-drilled mounting holes and can be cut to fit any plate size.

• 5 ft. long by 6 in. wide.
• Pre drilled mounting holes every 1 ft. on center.
• Pre indented cut lines every 1 ft. on center.

Plate Shims are installed to level and stabilize the road plate. Plate Shims are placed under both the road plate and Plate Locks giving the plate full bearing and to minimize shifting, bouncing and noise.

• Available in 1/4″, 1/2″, 3/4″ thickness.
• Installed to level and stabilize the plate.
• Use when there is a crown in the road or uneven road surface.

Plate Shims are installed to level and stabilize the road plate. Plate Shims are placed under both the road plate and Plate Locks giving the plate full bearing and to minimize shifting, bouncing and noise.

• Available in 1/4″, 1/2″, 3/4″ thickness.
• Installed to level and stabilize the plate.
• Use when there is a crown in the road or uneven road surface.

Plate Shims are installed to level and stabilize the road plate. Plate Shims are placed under both the road plate and Plate Locks giving the plate full bearing and to minimize shifting, bouncing and noise.

• Available in 1/4″, 1/2″, 3/4″ thickness.
• Installed to level and stabilize the plate.
• Use when there is a crown in the road or uneven road surface.

Recommended anchoring hardware.

• 3/8″ x 4″
• Anchor and Washer.

All you need for a 8′ x 10′ road plate.

• 8 Plate Locks (5′ x 6″)
• 3 Plate Shims (1/4″)
• 3 Plate Shims (1/2″)
• 3 Plate Shims (3/4″)
• 24 THD Anchors and washers

All you need for a 8′ x 10′ road plate.

• 6 Plate Locks (5′ x 6″)
• 3 Plate Shims (1/4″)
• 3 Plate Shims (1/2″)
• 3 Plate Shims (3/4″)
• 18 THD Anchors and washers